Miter Saw Excel
Perfect Miter Cuts Every Time
No need to slow down your sawing process to set up for that next miter job. The Miter Excel allows you to produce fast and accurate miter cuts with ease.
The easiest way to make fast and accurate miter cuts
Load the piece against the hard stop, press the lever to clamp the piece in place, and press GO. That’s all that is needed produce a sharp and accurate miter edge with very little chipping.
1. Hard Stop Positioning
Easily place material against hard stop for quick alignment and accurate cutting.
2. Pneumatic Clamping Systems
Heavy duty pneumatic clamps keep the material locked in position, eliminating movement during processing. Secondary brackets allow the Miter Excel to cut strips as small as 1-1/2 in.
3. Dedicated Mitering Blade
Utilizes a continuous rim, 14″ mitering blade for accurate cuts and reduced chipping.
4. Machined/Rubberized Table
The machined table top has a rubber surface, providing a calibrated surface to load stone with the polished side down to minimize bowing and warping of material.
5. Operator Control Panel
Simple to use, intuitive, controls make this a plug and play machine with minimal training necessary.
6. Pop-up Roller System
Pneumatic Rollers raise and lower to allow large pieces to be easily loaded. Simple design offers minimal maintenance issues long term.
The linear rail and fixed 45° angle of the cutting blade allow accurate, high quality cuts to be made. The front edge stop allows material to be positioned accurately on the saw. Pneumatic clamps help flatten the material and hold it in place so that there is no movement.
Varying material thickness and hardness can be cut with blade deflection and less chipping due to the diamond tipped, continuous ring, small diameter blade.
Material is loaded polished face down. This eliminates cutting errors caused by small variations in material thickness along the length of the cut.
- Fast and accurate miter cuts
- Reduced chipping
- Variable frequency spindle
- Dedicated 14″ miter blade
- No measuring required
- Minimal training
Easy To Use
No need for an experienced saw operator to run the Miter Excel. Minimal training is required
Built For Performance
- Precision linear rails for accurate movement
- Adjustable blade angle
- Pop up rollers
Flexible and Capable
- Variable frequency drive for blade RPM
- Large pneumatic clamps
- Extension table provided to support large pieces
- Central lubrication pump
- Cutting Stroke 10ft. 8in. (128 in.)
- Main Spindle Power 5HP
- Blade Size 14 in.
- Table Dimensions 11ft. 2in. X 2 ft.
- Overall Dimensions 15 ft. 5 in. X 4 ft.
- Weight 2,420 lbs
- Power Required 240V / 3p / 60 HZ / 20A
- Blade Angle 45°±1°
- Blade In-Out Movement 2 in.